Yes. The auto-choke system makes first-pull ignition the norm—even in cold or flooded conditions.

Absolutely. It handles steel profiles, pipes, and sheets with ease.

Approximately 10.9 kg (24 lb) dry.

Hilti DSH 700-X Review | Pro Concrete Cutter for Rescue and Heavy-Duty Jobs

Q: What’s the cutting depth of the Hilti DSH 700-X?

Up to 125 mm (5″) with a 14″ blade.

Q: Does it support wet cutting?

Yes. It includes a water connection and is compatible with Hilti’s DSH-P pump.

Q: What kind of fuel does it use?

A 50:1 mix of gasoline and 2% oil.

Q: Is it suitable for rescue operations?

Yes. Its depth, power, and durability make it ideal for emergency access.

Q: What’s the vibration level?

Around 5.2 m/s²—low enough for extended use with proper PPE.

Q: Does it require frequent maintenance?

No. The pre-tensioned belt and reinforced starter rope reduce downtime.

Q: Can beginners use it?

It’s best suited for trained professionals due to its power and fuel requirements.

Introduction: Built for Pros Who Cut Through the Toughest Jobs

The Hilti DSH 700-X is a professional-grade gas-powered cut-off saw designed for contractors, rescue teams, and industrial crews who demand performance without compromise. Whether you’re slicing through reinforced concrete, steel profiles, or masonry blocks, this tool delivers consistent power, ergonomic control, and low-maintenance reliability.

Engineered for wet or dry cutting, the DSH 700-X is ideal for European job sites where dust control, vibration reduction, and fuel efficiency matter. If you’re looking for a cutter that starts easily, runs hard, and lasts long—this is your saw.

Key Features & Technical Specifications

Feature	Specification
Engine Power	4.2 kW (~5.6 hp)
Displacement	87 cc
Max Cutting Depth	125 mm (5″)
Blade Diameter	350 mm (14″)
Fuel Mixture	50:1 (2% oil)
Weight (dry)	~10.9 kg (24 lb)
Vibration Level	~5.2 m/s²
Sound Pressure Level	~100 dB(A)
Starting System	Auto-choke with Easy Start
Air Filtration	Cyclone Air Filtration System
Maintenance	Pre-tensioned belt, reinforced starter rope
Water Compatibility	Compatible with DSH-P water pump (no pressurization needed)

Pros and Cons

👍 Pros

Powerful 87 cc engine for deep, fast cuts
Auto-choke system makes starting effortless—even in cold or flooded conditions
Cyclone filtration extends filter life and reduces downtime
Durable blade guard with integrated water bow for wet cutting
Tool-less belt and blade guard adjustment
Built for both concrete and metal cutting

👎 Cons

Heavier than some competitors (24 lb dry)
Higher upfront cost compared to STIHL TS 420
Requires fuel mixing (2-stroke engine)
May be overkill for light-duty or DIY use

Comparison to Alternatives

Model	Hilti DSH 700-X	STIHL TS 420	Makita EK7651H
Engine	87 cc / 4.2 kW	66.7 cc / 3.2 kW	75.6 cc / 3.0 kW
Cut Depth	125 mm	125 mm	~122 mm
Weight	24 lb	21.2 lb	~27 lb
Starting	Auto-choke	ElastoStart™	Manual
Filtration	Cyclone	X² Air	Standard
Fuel	2-stroke	2-stroke	4-stroke (no mixing)
Verdict	Best for rescue & heavy-duty	Best for general construction	Best for emissions & quiet zones

Use Cases: Who Should Buy It (and Who Shouldn’t)

✅ Ideal Buyers

Rescue teams needing fast, deep access in emergencies
Heavy-duty contractors cutting reinforced concrete or steel
Road and utility crews working in wet or dusty environments
Industrial demolition teams requiring rugged reliability

❌ Not Ideal For

DIY users or light-duty tasks
Indoor-only environments with strict noise limits
Teams unfamiliar with fuel mixing or 2-stroke maintenance

Real-Life Use Cases from the EU

Germany: Municipal rescue teams use the DSH 700-X for cutting through collapsed concrete during disaster simulations.
France: Roadwork crews rely on its wet-cutting capability to slice curbstones and expansion joints without dust violations.
Czech Republic: Utility contractors use it for trenching and pipe access in urban zones where reliability and depth matter.

Hilti DSH 700-X FAQ

What’s the cutting depth of the Hilti DSH 700-X?

Is it easy to start?

Can it cut metal?

Does it support wet cutting?

What kind of fuel does it use?

Is it suitable for rescue operations?

How heavy is it?

What’s the vibration level?

Does it require frequent maintenance?

Can beginners use it?

Interesting & Lesser-Known Facts

Interesting Fact: The DSH 700-X’s auto-choke system is designed to prevent engine flooding—making cold starts nearly foolproof.

Lesser-Known Fact: Hilti’s Cyclone Air Filtration system removes up to 80% of dust before it reaches the primary filter, extending filter life dramatically.

Conclusion: Is the Hilti DSH 700-X Worth It?

If you need a concrete cutter that performs under pressure, starts reliably, and lasts through the toughest conditions, the Hilti DSH 700-X is a top-tier choice. It’s not the cheapest or lightest—but it’s built for pros who demand results.

Have you used the DSH 700-X on your job site? Share your experience in the comments and help other professionals decide if Hilti is the right fit. Don’t forget to share this review with your crew or team.